Green Trust Sustainability & Renewable Energy

Off Grid and Efficient Products | Discussion Forums, Knowledgebase & News | Search | Support Green-Trust Amazon Store
News From the Front | Instructional eBooks and Videos | Green-Trust Photo Album | Newsletter | Links & Resources

Powered By
widgetmate.com
Sponsored By
Back Home Magazine

Thursday, February 16, 2006

Our Candle Heater Arrived

USPS arrived today with a 4+ lb package. With great anticipation we opened the box, and there it was. Our candle heater. It took about 4 minutes to assemble, which entails looping the 2 chains through the frame, single wrapped around each other between the posts, and our candle was lit and filling the room with aroma, light, and some heat. We supplied the candle, everything else was included. Though not meant to be a single heat source, it definitely spreads more heat than with the candle alone. More photo's can be found in our Photo Album, and the creator's website at http://www.heatstick.com/.

Update: Do not use a candle without a jar. The increased heat turns the whole thing into a puddle. The instructions call for a candle in a jar, and should be followed.

HEAT FROM A CANDLE? YES! YES! YES!

The Kandle Heeter(tm) Candle Holder is an attractive Ceramic Radiator suspended above a Candle Flame on a solid steel frame. And it really works! The Steel and Ceramic Radiator collects and concentrates the Heat from the Candle Flame, becomes Hot (but not burning), and Gently Radiates the Heat from the Candle into your Room. More information and photographs are available at www.heatstick.com and you can Buy It On Ebay! $24.95

Invented and Manufactured in Fortuna, California by Doyle Doss from Solid Steel and Ceramic components the Kandle Heeter(tm) Candle Holder is just over 9 inches tall and just under 7 inches wide and deep. It weighs over four pounds and ships in its own 200 lb test cardboard box.

The Steel and Ceramic Radiator is comprised of Three Nested Ceramic Modulators held together and separated by a Solid Steel Inner Core. The Steel Inner Core is positioned directly above the Candle and is driven to very high temperatures by the Flame. It gets Very, Very Hot!

The Nested Ceramic Modulators transfer and moderate the High Temperature of the Inner Core, one to another, until the outer Ceramic Modulator becomes a gently radiating Thermal Body that releases the Concentrated Heat from the Candle into your Home or Office. If you burn Candles, it only makes environmental and economical practical sense to Capture the Heat that is normally lost to the ceiling and use this Heat in your own environment. (A typical 4.5 oz. Jar Candle contains over 1,000 Btu’s!)

The Kandle Heeter(tm) Candle Holder makes a Real Difference in a small room or bedroom. If there is a Temporary Power Outage you will be able to create a Warm Room for your family and friends – Light and Warmth (both from the same source!) makes an Encouraging Difference while you wait for the storm to pass. If you have a Recreational Vehicle or Camping Trailer it will help you save Propane while you are enjoying the Great Outdoors.

Please visit our website (www.heatstick.com). Please distribute this information in your newspaper, magazine, blog, and to your friends. We would greatly appreciate your comments and suggestions. We are DOSS Products, we specialize in Energy and Environment Practical Invention, and we want to help you Stay Warmer This Winter For Less! Thanks.

Doyle Doss


Web hosting by ICDSoft

Listed on BlogShares